Ford Kuga Mk1: 2008-2012. The first-generation Kuga was rather compact in size compared to the latest one, but its Ford Focus underpinnings meant that it was one of the best driving SUVs of its Ford Models ; Ford Focus Club ; Boot lock kinda not working?? Ford Model: Ford Focus Mk2 LX Petrol 1.6 Ford Year: 2005 UK/Ireland Location: Co-Antrim Ford Model: Focus Estate 1.6 TDCI Style Ford Year: 2007 UK/Ireland Location: Devon Share; Posted August 4, 2014. Easy when you know how . Tar. Ford Model: Mean Green Focus ST. Ford Year: 2023. UK/Ireland Location: Devon. Posted June 27, 2023. Only non european cars have the emergency boot release. You need to power the boot circuit to open it unfortunately. To access the lock you'd need to strip out the hatch trim which mesns the boot needs to he open. 2. 0. Country. 30 Aug 2021. #1. Hi does anyone have any experience of replacing the two rubber bump stops on the boot of an mk2 Ford Focus? The part number is 1354972. Its an 09 Ford Focus 1.6 Zetec. It looks like each is held one with two bolts but each has a small circular hole in the centre in which no bits seem to fit. 8.4k. Name: Ford Model: Ford Focus Mk2 LX Petrol 1.6. Ford Year: 2005. UK/Ireland Location: Co-Antrim. Posted January 21. On 1/21/2023 at 7:30 AM, Jimpster said: just replace cheap enough via eBay etc, 2 man job or a broom handle to stop the tail landing on your head once you disconect. True Ford Enthusiast; 16.4k Name: Lenny Ford Model: Now operating under the name @BigLen Ford Year: 2010 UK/Ireland Location: Other/NonUK to remove it its probably best to use a heat gun and then a thin string to slice the old badge out. Members via FB. 18. Name: Richard. Ford Model: Focus 2.0Tdci Titanium Sport. Ford Year: 2009. UK/Ireland Location: Nottinghamshire. Author. 25. Name: Jamie. Ford Model: Focus. Ford Year: 2006. UK/Ireland Location: Norfolk. Posted April 19, 2019. Hi all. So my MK2 just failed it’s MOT due to an “illegible” number plate. Got a new one however had a mission of a job to remove the old, the screws were just spinning and with no easy access to the back I just snapped the old plate off. If it's double locked, no. If it's just locked: Very carefully bend the top left of the driver's door out at the B-Post (where it meets the rear door) about 1 inch. Make a hook on the end of a metal coat hanger, straightened for length. Feed coat hanger through door, engage on driver's interior release handle and pull. jEp6JI.